Low Noise UHMW-PE Material Conveyor Guide Roller Applied in Power
Guide roller also called vertical roller, we can manufacture guide
rollers according to your drawing and request. The Roller mainly
used in the steel industry, harbor, coal industry, power industry,
cement industry, etc and we have Passed CE certification and
ISO9001: 2000 certificate.
Vertical roller, is connected with the adjusting support and
installed at both sides of conveyor belt. It can prevent the
conveyor belt from deviating, and therefore to ensure the belt
- Corrosion resistance
- Operate quiet
- The roller does not tear the belt during working, as the material
of the roller body is excellent.
|Outside diameters run out of roller||mm||0.5-0.7|
|Revolving resistance of roller||N||3.3-3.5|
|Applied in temperature||℃||Less than 80|
Test About UHMW-PE Material
|Project Name||Unit||Test Method||Test Result|
|Compressive Strength||MPa||ASTM D-638||≥42|
|Water Absorption||%||ASTM D-570||<0.01|
|Impact Strength||KJ/M2||ASTM D-256||≥140|
|Heat distortion Temperature||℃||ASTM D-648||85|
|Friction Coefficient||ASTM D-1894||0.11-0.17|
Hongda plastic roller's service life is 2 - 3 times than other
else's under the same conditions and working atmosphere.
1 Our factory founded in 1983.
2 Samples for testing are available.
3 The more relaxed payment terms.
4 The factory is specialized in nylon rollers, UHMW-PE sheets of
type I, II, III and rods
5 We have strict quality contral system.