Chemicals Resistance UHMW-PE Rod with Diameter 15-200 mm Customized
UHMW-PE Rod is Ultra-high-molecular-weight polyethylene Rod. The
molecular weight for the material is above 1.5million, it is a new
kind of engineering plastic. With high molecular weight, the melt
flowing rate is almost "0". The process is very difficult. And the
common way of process is compression moulding.
- Moisture resistant
- Chemical resistant
- Stress crack resistant
- Low coefficient of friction
- Prevents steel degradation
- Non toxic / Non hazardous
- Non-toxic food grade
- Pultruded rod available for tight
- tolerances and dimensional stability
- Easy to clean
- Easily machined
- High impact strength
- High energy absorption
- High abrasion resistance
- Reduces machine noise
1. Good abrasion resistant: the adrasion rate for UHMW-PE is 0.62,
for PTEF is 2.31 and for steel is 4.02.
2. High impact resistant: the impact rate for UHMW-PE is 140kj/m2,
for PTFE is 16kj/m2 and for ABS is 6-34kj/m2.
3.Low moisture absorption: the rate for UHMW-PE is 0.01-0, for ABS
is 0.20-0.45 and for POM is 0.25.
4.Low friction coefficient: for UHMW-PE is 0.07-0.11, for PTFE is
0.04-0.1 and for ABS is 0.38.
|Length||Diameter||Diameter Tolerance||Ellipticity||Special-Shaped Products|
|≦1200 mm||∅15-∅200 mm||±0.5 mm||≦4-6||Customized|
• Mining industry: manufacturing artificial slot liner, chain plate, the vibrating
screen plate, conveyor plate, car plate.
• General machinery industry: manufacturing all kinds of shaft sleeve, gear, bushing, slide
plate, the impeller, etc.
• Vehicle manufacturing and transportation industry: the main products is dump truck, self-unloading vessels lining
board, the train vehicles impact resistance parts, etc.
• Paper industry: the main production of vacuum suction box panel and the wiper
plate, pressure parts, connector, mobile seal shaft rod, idler
pulley, scraper, filters, etc.
• Textile industry: manufacturing all kinds of leather knot, volume fiber, picking
stick, gear, coupling.Sweep flower stem, buffer block, shaft
sleeve, swinging back rest impact wear resistance parts, etc.
• Skiing sports industry: ski lining, track ice and snow car parts, glider block floor, and
the steel ball equipment parts, all kinds of bearing bushing,
scroll fairway, snowmobile parts, etc.
|Heat distortion temperature||100℃|