Long Sevice Life Self - Alignment Roller Applied in Cement Plant
with Diameter 89 mm
The friction self - alignment roller is installed on adjusting or
ordinary trough frame to prevent the conveyor belt from deviating.
Plastic self - alignment roller friction coefficient is small (only
0.1 ~ 0.15), high self-lubricating, will not cause wear on the
belt, the belt life extension of 1 to 2 times. Because the plastic
roller itself is wear-resistant, self-lubricating, the friction
coefficient is small, has the super anti-adhesion ability, so the
roller surface will not stick and accumulates the material,
enhances the host movement smoothness, reduces the material jitters
Down, and significantly reduce the noise of the machine, you can
make the belt conveyor to achieve long distance, large volume, high
To achieve the operation of small help, low noise, wear resistance,
non-stick material, smooth operation, long roller life, is the
traditional roller 2 to 3 times. But also to eliminate or reduce
all kinds of accidents, improve safety performance. Metal roller is
easy to rust, friction coefficient (0.68 ~ 0.8.) easy to stick
material, so the operation of large, high noise, easy to wear,
smooth operation, low service life. Ceramic roller is not easy to
adhere to the material, the friction coefficient, poor impact
resistance, so easy to wear, high noise, low stability, short
2 Corrosion resistance
4 Small power consumption
5 Operate quiet
6 Self lubrication
7 Long service life
Radial circular run-out
Professional sales team service for pre-sales, sale, and
after-sales. They all have more than 5 years of sale experience and
familiar with the product and application environment, from whom
you can recommend a more suitable combinations. Using our any
product, in case of any problem, we will send professionals to the
Design and Engineeting
• Manufacturing conveyor rollers according to industry standards
and/or customer requirements.
• We can assist you to design the conveyor roller using CAD
systems, and make sure meet your requirments.
• Quality assurance according to industrial standards.
• Failure analysis and investigation.
If you have any problems during the process of using idle rollers
and sheet, please contact with us, we will help you to analysis
problems and provide the solutions.
Corporate Commitment: Hongda never fakes.