UHMW-PE Spiral Conveyor Cleaning and Tracking Roller with Abrasive
The roller can powerfully clean the belt blinding material, but
does not stick material by itself. Even if the material is frozen
in the cold winter, the roller still works normally and
UHMW-PE belt toller adopts 100% pure new UHMWPE material, bearing
is from famous factory LYC.
Manufactured using highly wear resistant uhmw-pe spiral rings which
prevent and assist in cleaning off sticky carry back from the belt.
These rollers offer a maintenance free solution to conveyor belt
cleaning and tracking as an alternative to plain steel or disc flat
& vee return rollers.
The Spiral cleaning roller is well suited to the mining, quarrying
and process industries, where build-up on return rollers causes
belt damage and mis-tracking.
Spiral cleaning rollers are resilient and wear-resistant
polyurethane spirals that help to clean off sticky carry-back in
conveyor systems. Consisting of a standard return roller fitted
with wear resistant polyurethane rings, the spiral in left and
right hand configuration assist in belt tracking with the unit
positioned over the discharge chute or a collection hopper.
Spiral cleaning rollers may be employed on any part of the return
belt section in short conveyors while it is beneficial to employ
them on long sections only up to the point where the material does
not adhere any more to the belt surface. These rollers should not
be employed as snub rollers adjacent to the drive or return drums.
|Outside diameters run out of roller||mm||0.5-0.7|
|Revolving resistance of roller||N||3.3-3.5|
|Applied in temperature||℃||Less than 80|
2 Corrosion resistance
4 Small power consumption
5 Operate quiet
6 Self lubrication
7 Long service life
Difference between metal roller, ceramic roller, rubber roller and
|Metal roller||Ceramic roller||Rubber roller||Plastic / Nylon roller|
|advantages||rigid and not easily deformed;recyclable;surface colourful||insulated;corrosion-resistant;wear-resistant;no adhesion||light;good vibration absorption;||water-proof;dust-proof;corrosion-resistant;low friction
coefficient;low noise;low power consumption;easy installation.|
|disadvantages||inconvenient installation;non- corrosion resistant;unsatisfactory
sealing ;easy to tear belt when roller breakdown.||easy broken; inconvenient installation;||large friction coefficient;non-corrosion resistant;easy aging||not bear high temperature; applied in the status of below 80℃|