Nylon Return Rollers Dus-proof Special sturcture Corrosive
Return roller is used for the belt return back without carrying
materials. There are two kinds of the idlers: parallel idler return
roller and V shaped idler return roller.
Simple Structure of our roller:
The structure of our roller is special as you can see from the pic.
The shaft is inside of the dust cap, that is to say you cannot see
the shaft outside. This design will keeps the dust and water
Diameter:φ89-φ159mm; Tube width: 190-1800 mm.
|Specification of Belt Conveyor|
(Equal Troughing Idler)(mm)
|We also make customized impact rollers and other sizes plastic
rollers as your requests.|
1. Long Service Life - Our plastic roller is strived for perfection while choosing and
processing the raw materials, and it is corrosion resistant,
dustproof and waterproof and under equal conditions, the service
time of the roller is 2-3 times longer than that of common rollers.
2. Energy Saving - The weight of the plastic roller is around one seventh of that of
metal roller. It consumes less electricity than other heavier
rollers. A 50-meter long conveyor belt that uses our plastic
rollers, for instance, can save electricity fare worth 3,000 to
30,000 RMB annually.
3.Capable of Extending the Life Span of the Conveyor Belt - The plastic roller has low friction coefficient, excellent
self-lubricating property and a smooth surface. Even if one roller
breaks down, it won't pull, tear or damage the expensive conveyor
belt and therefore can extend the life span of the belt.
4. Easy Installation - Plastic roller is light and therefore can be easily installed by
just one person. Also it usually needs no maintenance as it has a
low damage rate.