Corrosive Resistant Carrier Idler Roller Nylon Mateial Fit for
Troughing Carrying Idlers are used for conveying bulk materials.
Usually three rollers in one group are installed on one set. They
are designed and manufactured with troughing angles of 20°,35°,45°.
Corrosive Resistant: as the material outside is nylon, so the material itself is
Dust-proof: the structure of our rollers are 'three-section' of shaft, that
means the shaft is inside of the roller, you can not see it from
the out. So the dust can not enters into the inside of roller, so
will protect the bearings.
Waterproof: as you can see from the picture, the dust covers are out of the
tube, so if there is any water, the water will go along the edge of
Diameter:φ89-φ159mm; Tube width: 190-1800 mm.
|Specification of Belt Conveyor|
(Equal Troughing Idler)(mm)
|We also make customized impact rollers and other sizes plastic
rollers as your requests.|
● Outside diameter run out of roller: 0.5-0.7 mm
● Revolving resistance of roller: 3.3-3.5 N
● The axial movement distance of the roller between the frame is
less than 3 mm
● Applied in temperature: ≤ 80℃